Structural

Lintel

A lintel is a horizontal beam of stone, timber, steel or concrete that spans the top of a door, window or other opening and carries the weight of the wall above it.

Origin From Old French lintel.

Sample entry from the theme's demo content, shown to preview the layout.

How a lintel works

A lintel acts as a short beam. The weight of the wall above presses down on it and makes it bend, so that its lower edge is in tension and its upper edge in compression, and it passes that weight sideways to the jambs or bearings at each end of the opening. In bonded masonry the load on a lintel is often smaller than the full height of wall above, because the brickwork or stonework tends to arch over the opening and carry part of the weight itself.

The post-and-lintel, or trabeated, system is one of the oldest ways of building, seen in the stone trilithons of Stonehenge and in the temples of ancient Egypt and Greece.

Stone is strong in compression but weak in tension, so stone lintels can only span short distances, which helps explain the closely spaced columns of ancient temples. Wider openings were later spanned with arches, and builders sometimes placed a relieving arch or relieving triangle above a lintel to divert load away from it. Modern lintels are made of steel, reinforced or prestressed concrete, timber or composite steel and concrete, and each end must bear on the wall for an adequate length. In North American timber framing a lintel over an opening is commonly called a header. A lintel differs from an arch in that it is straight and works by bending, while an arch is curved and works mainly in compression.

Famous examples of Lintel

  • Stonehenge

    Wiltshire, England, UK

    Horizontal stone lintels rest on pairs of upright stones to form the trilithons, held in place by carved joints.

  • Lion Gate

    Mycenae, Greece

    A massive single stone lintel spans the gateway, with a relieving triangle above it filled by a carved limestone relief.

Frequently asked questions

What is the difference between a lintel and an arch?

A lintel is a straight horizontal member that carries the load above an opening by bending. An arch is curved and carries the load in compression around its shape, which lets it span wider openings with small units of stone or brick but produces outward thrust at its base.

What is the difference between a lintel and a beam?

A lintel is a kind of beam. The word is used specifically for the member over a door, window or other opening in a wall, while beam covers any spanning member in a structure.

What is a relieving arch above a lintel?

A relieving arch is an arch built into the wall above a lintel. It carries most of the weight of the wall around the opening, so the lintel below only has to support the small amount of masonry inside the arch.

Sources

Cite this term

Architectural Dictionary. (2026, November 14). Lintel. In Architectural Dictionary. https://architecturaldictionary.org/structural/lintel