Beam
A beam is a horizontal or sloping structural member that spans between supports and carries loads applied across its length, resisting them mainly through bending and shear.
Origin From Old English bēam, meaning tree or piece of timber.
Sample entry from the theme's demo content, shown to preview the layout.
How a beam works
When a load presses down on a beam supported at both ends, the beam bends: its top is shortened in compression and its bottom is stretched in tension, while a line within its depth, the neutral axis, carries neither. The beam must also resist shear, the tendency of one part to slide past the next, which is highest near the supports. Deeper beams are much stiffer and stronger in bending, which is why the steel I-section places most of its material in top and bottom flanges, far from the neutral axis, and joins them with a thin web.
The stone lintel over a doorway is one of the oldest forms of beam, and rolled iron and then steel I-beams made long, economical spans possible from the nineteenth century onward.
Beams are classified by how they are supported: simply supported beams rest on a support at each end, continuous beams run over several supports, fixed beams are built in at both ends and a cantilever is supported at one end only. They are made of timber, glued laminated timber, steel or reinforced concrete, in which steel bars are placed in the tension zone because concrete is weak in tension. In a typical floor, smaller beams called joists carry the floor deck and deliver their loads to larger beams or girders, which in turn rest on columns or load-bearing walls.
Famous examples of Beam
-
Farnsworth House
Steel beams carrying the floor and roof slabs are welded to the faces of eight steel columns, so the house appears to float above the ground.
Frequently asked questions
What is the difference between a beam and a lintel?
A lintel is a particular kind of beam that spans the top of a door or window opening and carries the wall above it. Beam is the general term for any member that spans between supports and resists bending.
What is the difference between a beam and a girder?
A girder is a large main beam that supports other, smaller beams, such as joists. Both work in the same way, by bending, but girders carry heavier, concentrated loads.
Why are steel beams shaped like an I?
Bending stresses are greatest at the top and bottom of a beam and zero at the neutral axis. The I-shape puts most of the steel in the flanges, where it does the most work, and uses a thin web to connect them and resist shear.
Sources
Cite this term
Architectural Dictionary. (2026, November 14). Beam. In Architectural Dictionary. https://architecturaldictionary.org/structural/beam
"Beam." Architectural Dictionary, 14 Nov. 2026, https://architecturaldictionary.org/structural/beam.
Architectural Dictionary. "Beam." Last modified November 14, 2026. https://architecturaldictionary.org/structural/beam.