Structural

Load-bearing wall

A load-bearing wall is a wall that supports the weight of floors, roofs or other walls above it, in addition to its own weight, and transfers those loads down to the foundations.

Sample entry from the theme's demo content, shown to preview the layout.

How a load-bearing wall works

A load-bearing wall carries vertical loads in compression. It collects the weight of floors, roofs and walls above and passes it down to a foundation, usually a continuous strip footing beneath it. Because loads accumulate from the top of a building to the bottom, the lowest storeys of a tall load-bearing building need the thickest walls. Openings for doors and windows interrupt the path of the load, so they must be bridged by a lintel or an arch that carries the wall above and delivers its weight to the sides of the opening.

Until the nineteenth century most substantial buildings were built with load-bearing walls of stone, brick or earth, and the arrival of iron and steel frames made it possible to separate the structure of a building from its enclosure.

Load-bearing walls are still widely used in houses and low-rise buildings, built from brick, concrete block, stone, timber stud framing or cross-laminated timber. They differ from non-load-bearing walls, such as partitions and curtain walls, which carry only their own weight and can be moved or removed without affecting the structure. Many load-bearing walls also act as shear walls, stiffening a building against wind and earthquake forces. Because removing a load-bearing wall or cutting a large opening in it can endanger the floors above, any such alteration should be designed by a structural engineer and the structure supported temporarily during the work.

Famous examples of Load-bearing wall

  • Monadnock Building

    Burnham and Root · Chicago, Illinois, USA

    The northern half of the building is a tall office block with load-bearing brick walls that grow much thicker toward the base.

Frequently asked questions

What is the difference between a load-bearing wall and a non-load-bearing wall?

A load-bearing wall supports floors, roofs or walls above it and is part of the structure. A non-load-bearing wall, such as a partition or curtain wall, carries only its own weight and can usually be altered without affecting the stability of the building.

What is the difference between a load-bearing wall and a shear wall?

A load-bearing wall is defined by carrying vertical loads, while a shear wall is defined by resisting horizontal forces from wind or earthquakes. Many walls do both jobs at once.

How can you tell if a wall is load-bearing?

Clues include walls that run beneath joists or beams, walls stacked above one another on each floor, and external walls. These are only indications, so drawings or an inspection by a structural engineer are needed before any wall is removed.

Sources

Cite this term

Architectural Dictionary. (2026, November 14). Load-bearing wall. In Architectural Dictionary. https://architecturaldictionary.org/structural/load-bearing-wall